3.3kw Automatic Focusing Cutting High-speed And High-precision Laser Cutting Solution

This solution adopts AWS intelligent laser numerical control system, which has full-time efficiency and convenient software and hardware expansion, which can adapt to the processing of various materials. The use of EIM-88C1 bus-type high-precision capacitive sensor enhances its anti-interference ability and enables it to collect more data into the system, which is convenient for the adjustment of cutting parameters. BM111 SERIES 3.3KW auto-focusing cutting head has high dustproof performance, effectively prolongs the use time of cutting processing, and has short perforation time and high processing efficiency.

Product features:

AWS Intelligent Laser CNC System

1. Convenient installation

Integrated CAM software, can realize common edge, bridge, knife gap compensation and various sorting methods,

Support EherCAT bus, fast transmission speed, strong anti-interference ability, simple electrical connection.

2. High-speed, high-precision cutting

Corner, Small Circle, Power Control, CCD Vision Integration

3. Intimate user customization

Convenient software and hardware expansion, support custom workbench and various non-standard applications.

4. Comprehensive functional application

Wide range of processing materials, supporting various processing materials such as metal, ceramic, plastic, leather, etc.

5. Convenient software and hardware function expansion, which can support customized workbench and control of various lasers.

 

EIM-88C1 Bus Type High Precision Capacitive Sensor

1. Range 40mm, adjustment accuracy ±0.001mm

2. Enhance anti-interference ability and adaptability

3, bus control, small size, easy installation

 

BM111 SERIES 3.3KW Autofocus Cutting Head

• Auto focus

By setting the value, the laser head can focus quickly and accurately, reducing human interference and making the operation more convenient

• High degree of dust protection

The dustproof grade is IP65, and the optical path is completely enclosed, and the possibility of lens contamination is almost zero.

• High-speed perforation

The pre-piercing time of 20mm carbon steel can be less than 3 seconds, which greatly improves the efficiency of laser processing

technical parameter:

EIM-88C1 Bus Type High Precision Capacitive Sensor

 

Power supply mode: EIM series coupler power supply

Input signal connection method: special supporting wiring harness

Input signal channel: 1 channel

Communication interface: PBUS

24V current consumption: 17 mA typical

P-bus current consumption: typ. 360 mA

Configuration: no address or set configuration

Capacitor output sampling rate: 1000Hz

Corresponding accuracy of dynamic height: up to ±0.001mm (depending on the mechanical structure and calibration method of the laser head)

Steady-state height corresponding accuracy: up to ±0.001mm (depending on the mechanical structure and calibration method of the laser head)

The fastest following speed: 1000mm/s (depending on the pitch of the servo motor and the screw)

Indicator light: power indicator x1;

Communication link indicator x2;

Running status indicator x1;

Port indicator x3;

Electrical isolation: 500Vrms (mains voltage/fieldbus)

Working/Storage Temperature: -20℃~+65℃ / -40℃~+65℃

Operating humidity range: 10~95% relative humidity, non-condensing

Protection class / installation method: IP20 / DIN rail installation

Weight: about 120 g

 

BM111 SERIES 3.3KW Autofocus Cutting Head

 

Power level: ≤3.3KW

Focal length of collimating lens: ①75mm; ②100mm; ③125mm; ④150mm;

Focusing lens focal length: ①125mm; ②150mm;

Nozzle hole specifications: ①Single layer; ②Double layer; ③Non-standard;

Optical fiber interface: ①QBH; ②QD;

Nozzle aperture: ①0.8mm; ②1.0mm; ③1.2mm; ④1.5mm; ⑤2.0mm; ⑥2.5mm; ⑦3.0mm; ⑧3.5mm; ⑨4.0mm

Focused Clear Aperture: 28mm

Collimation lens specification: φ24.9mm*1.5mm

Focus protection lens specifications: φ27.9mm*4.1mm

Auxiliary gas pressure: ≤30bar

Weight: ~5.4kg